EDM-900 Color Engine Management System

$4,689.00 – $6,750.00

If you are redoing your panel, consider a primary JPI EDM. With the 900 on board, you can remove many of your old engine gauges, open up valuable space in your panel, and fly with peace of mind knowing the JPI will alert you instantly if any of the parameters exceeds the programmed limit. Like the 730/830, the EDM 900 is offset, and can fit both directions in your panel. Using the USB port data can be downloaded using free EzTrend software, or easily updated with a thumb drive. Non certified information can user configured. The EDM 900 is a TSO’d, compact and very easy to use and read in flight.

Clear
Add to wishlist
Compare
SKU: N/A Category:

Description

Features:

 

  • FAA STC approved to replace all engine instruments in over 1000 of aircraft
  • GPS input/output to all GPS’s including handheld
  • Over 40 functions displayed and recorded including fuel level
  • Proven data recording once every 6 seconds
  • Specifically configured for your aircraft per the POH

Includes:

Hardware Included:

  • EDM-900 all-in-one bright SVGA display
  • Pre-wired harness for all functions
  • All EGT/CHT probes
  • Oil pressure transducer
  • Oil temperature sensor
  • OAT sensor
  • RPM sensor, one required
  • Manifold pressure transducer
  • 100 amp shunt (2)(for amps)
  • Volts pick-up V-1 and V-2
  • 2GB memory download/upload stick
  • FloScan fuel flow transducer w/firesleeve
  • Demo DVD

Functions Included:

  • RPM Engine
  • MAP Manifold Pressure
  • % HP Percent of Horse Power
  • EGT Exhaust Gas Temp
  • CHT Cylinder Head Temp
  • O-T Oil Temperature
  • O-P Oil Pressure
  • OAT Outside Air Temp
  • VDC Voltage
  • AMP Current amps/load
  • GPH Gallons per Hour
  • REQ Required to wp or destination
  • USD Fuel used
  • MPG Miles per Gal
  • L-R Main Fuel Quantity, level
  • CLD Shock Cooling on All cylinders
  • DIFF Gami spread high low fuel flow
  • USB Memory stick 2GB
  • Data Recording 800 Hrs every 6 sec
  • EZTrends Graphing Software free

Available Options:

  • Fuel Pressure (Transducer & Harness)
  • Amps – 2
  • Volts – 2
  • TIT 1 & 2
  • CDT (Compressor Discharge Temperature)
  • IAT (Induction Air Temperature)
  • Diesel MAP to 105 in hg
  • Diesel RPM

 

Additional information

Cylinder/Tanks

4 Cyl, no tanks, 4 Cyl, 2 tanks, 4 Cyl, 4 tanks, 6 Cyl, no tanks, 6 cyl, 2 tanks, 6 Cyl, 4 tanks, 7 Cyl, 4 tanks, 8 Cyl, 4 tanks, 9 Cyl, 4 tanks

Related products

  • EDM-800 Engine Analyzer w/ Fuel Flow
    $2,919.00 – $3,689.00

    If you are looking for a cost effective solution to monitor your engine using our time proven EDM technology, take a look at the EDM 700/800 series. The main difference between the two is the EDM800 includes fuel flow as part of the package. These Plasma screen have been delivering engine information for millions of flight hours and fit in a standard panel hole. They are fully automatic, yet allow the user to select any readout, and of course offer LOP as well as ROP leaning displays. Stored parameters are updated every few seconds and can be downloaded and viewed using our free EzTrend software.

    Clear

    EDM-800 Engine Analyzer w/ Fuel Flow

    $2,919.00 – $3,689.00 Select options
    Quick View
    Compare
    Add to wishlist
  • EDM-730 Color Engine Monitor
    $1,549.00 – $2,600.00

    Displays EGT’s, CHT’s, TIT and/or Oil Temp (digital and bar graph display). Other temperatures & functions will be displayed digitally only. Engine analysis performed automatically with Pilot Programmable Over-Temp Limits, a Differential Limit and a Shock-Cooling Limit. Range for Bars and Scan Rate are also Pilot Programmable. Proprietary Peak Detect for ROP and LOP eliminates false peak readings. Indicates as each Cylinder reaches Peak EGT. Displays Temperature Below Peak EGT for accurate Leaning. Fuel/Air Mixture Profiling. Normalized Mode with Long Term Memory for Easy Problem Detection and Trend Analysis. Charting and download software included free.

    Clear

    EDM-730 Color Engine Monitor

    $1,549.00 – $2,600.00 Select options
    Quick View
    Compare
    Add to wishlist
  • EDM-830 Color Engine Monitor
    $2,579.00 – $3,549.00

    %HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure + USB

    Available Functions: RPM, MAP, 4-6 EGT, 4-6 CHT, TIT (two), Oil Temp, Oil Pressure, OAT, Volts, CARB Temp, CDT, IAT, %HP, EGT SPAN, GPH, USD, REM, REQ, MPG, USB Data

    With the EDM 830, it is now possible to have substantially more diagnostic information available to you in a timely and usable manner.

    Clear

    EDM-830 Color Engine Monitor

    $2,579.00 – $3,549.00 Select options
    Quick View
    Compare
    Add to wishlist
  • EDM 700 Engine Analyzer
    $1,892.00 – $3,411.00

    EDM 700 The Engine Data Management 700 system is the most advanced and accurate piston engine-monitoring instrument on the market. Using the latest microprocessor technology, the EDM will monitor up to twenty-four critical parameters in your engine, four times a second.

    Clear

    EDM 700 Engine Analyzer

    ,
    $1,892.00 – $3,411.00 Select options
    Quick View
    Compare
    Add to wishlist