Showing all 6 results
$1,892.00 – $3,411.00
EDM 700 The Engine Data Management 700 system is the most advanced and accurate piston engine-monitoring instrument on the market. Using the latest microprocessor technology, the EDM will monitor up to twenty-four critical parameters in your engine, four times a second.
EDM 700 Engine Analyzer$1,892.00 – $3,411.00 Select options
$1,549.00 – $2,600.00
Displays EGT’s, CHT’s, TIT and/or Oil Temp (digital and bar graph display). Other temperatures & functions will be displayed digitally only. Engine analysis performed automatically with Pilot Programmable Over-Temp Limits, a Differential Limit and a Shock-Cooling Limit. Range for Bars and Scan Rate are also Pilot Programmable. Proprietary Peak Detect for ROP and LOP eliminates false peak readings. Indicates as each Cylinder reaches Peak EGT. Displays Temperature Below Peak EGT for accurate Leaning. Fuel/Air Mixture Profiling. Normalized Mode with Long Term Memory for Easy Problem Detection and Trend Analysis. Charting and download software included free.
EDM-730 Color Engine Monitor$1,549.00 – $2,600.00 Select options
$2,919.00 – $3,689.00
If you are looking for a cost effective solution to monitor your engine using our time proven EDM technology, take a look at the EDM 700/800 series. The main difference between the two is the EDM800 includes fuel flow as part of the package. These Plasma screen have been delivering engine information for millions of flight hours and fit in a standard panel hole. They are fully automatic, yet allow the user to select any readout, and of course offer LOP as well as ROP leaning displays. Stored parameters are updated every few seconds and can be downloaded and viewed using our free EzTrend software.
EDM-800 Engine Analyzer w/ Fuel Flow$2,919.00 – $3,689.00 Select options
$2,579.00 – $3,549.00
%HP/FF/OAT/MAP/RPM/Oil Temp & oil pressure + USB
Available Functions: RPM, MAP, 4-6 EGT, 4-6 CHT, TIT (two), Oil Temp, Oil Pressure, OAT, Volts, CARB Temp, CDT, IAT, %HP, EGT SPAN, GPH, USD, REM, REQ, MPG, USB Data
With the EDM 830, it is now possible to have substantially more diagnostic information available to you in a timely and usable manner.
EDM-830 Color Engine Monitor$2,579.00 – $3,549.00 Select options
$4,689.00 – $6,750.00
If you are redoing your panel, consider a primary JPI EDM. With the 900 on board, you can remove many of your old engine gauges, open up valuable space in your panel, and fly with peace of mind knowing the JPI will alert you instantly if any of the parameters exceeds the programmed limit. Like the 730/830, the EDM 900 is offset, and can fit both directions in your panel. Using the USB port data can be downloaded using free EzTrend software, or easily updated with a thumb drive. Non certified information can user configured. The EDM 900 is a TSO’d, compact and very easy to use and read in flight.
EDM-900 Color Engine Management System$4,689.00 – $6,750.00 Select options
$5,439.00 – $6,869.00
If you are looking for a larger, Primary engine gauge replacement, the TSO’d EDM 930 (3.3″ deep -5.584″ wide – 5.11″ high) will flush mount into your panel. With a large sunlight readable, LCD display, JPI’s flagship monitor offers almost unlimited options and configurations. 7 or 9 cylinder, no problem for all JPI products, and their fast response grounded EGT probes and copper tipped CHT probes are by far the highest quality hardware available.
EDM-930 Primary Engine Data Management$5,439.00 – $6,869.00 Select options
All products loaded